What is the function of the hydraulic transition joint

In a hydraulic joint, a hose joint is a joint clamped between the ends of the hydraulic hose. The connection of the hose joint to the component port usually requires a transition joint. The hydraulic transition joint acts between the hard joint and the port member during the transition process, or directly as part of the hard pipe joint. What is the function of the hydraulic transition joint?

Since the contact surface between two different metals is easily oxidized, the two metals are joined together, the contact surface will be oxidized very quickly, the contact resistance will increase, and then a vicious cycle, followed by the increased resistance of heating and contact, will burn the machine, this phenomenon can be avoided by the use of hydraulic transition joints.

(1) Pre-installation

(2) Do not add sealant and other fillers. In order to achieve a better seal, the sealant was applied to the ring. As a result, the American threaded transition joint sealant was flushed into the hydraulic system, resulting in a blockage failure of the hydraulic element.

(3) When connecting the pipeline, the pipeline should have enough deformation margin to avoid the tension of the pipeline.

(4) When connecting the pipeline, the lateral force should be avoided. The lateral force is too large, which can not make the seal not strict.

(5) When connecting the pipe, it should be done once to avoid multiple disassembly, otherwise the sealing performance will decline.

The material of the sleeve precision seamless steel pipe is mainly divided into carbon steel and plastic, the top cover and the bottom are made of carbon steel, and the middle pipe is made of plastic. The plastic inside isn't just any plastic, it's highly polymerized. It is made of sheet metal, stamping and other processes. The surface treatment method is galvanized, but also can be treated according to the specific environment and customer requirements, effectively prevent the plastic part of the surface oxidation tube clamp necrosis. It consists of three parts: upper and lower plates, pipe clamps and screws and nuts.